Step by step braiding with ribbon. Subtleties of braiding with ribbons. Braids with ribbons - sleight of hand and step-by-step photos

Mantras

Braids with ribbons have been known since ancient times, but nowadays they are quite rare. That is why girls who have managed to master this art will never be left without the attention of strangers. Think braiding with a ribbon will be too difficult for you? Follow our master class and master the most fashionable options.

What is needed for weaving?

Before you start, you should prepare all the necessary things so that nothing distracts you from weaving the most beautiful braids. You will need:

Ribbon. Color and width – if desired, the length should be much longer than the length of your hair;
Styling products – spray, varnish or gel;
Thin elastic bands;
Combs – a thin, fine-toothed brush and a large brush;
Crabs, pins, clips and bobby pins.

Braids with ribbons - sleight of hand and step-by-step photos

Our photo lesson will help even inexperienced craftswomen. Of course, a beautiful braid may not turn out the first time, especially if you do it on yourself. It’s better to practice on a wig or a friend, and then start weaving elegant braids on your hair.

Four-strand braid

A four-strand braid looks very elegant. Based on it, you can create a lot of different hairstyles.

Comb your hair into a side parting. On the left side, we separate a thin curl and tie a ribbon (long and folded in half) at its base.
Divide the curl into three identical strands + an additional strand of ribbon. Your task is to create a four-strand braid. For convenience, it is better to number them from left to right. We assign the third number to the tape.
We pass the first strand under the second and place it on the third. We put the fourth on top of the first and pass under the third.
We repeat the same pattern, adding additional strands from the sides to the main braid. If you follow the numbering, the weaving should look like this: second, fourth, third and first strand.
Add hair to the second strand, pass it under the fourth and place it on the third.
We add hair to the first strand on the right, put it on the second and pass it under the third.
We repeat steps 5 and 6, finish our braid and tie it with the same ribbon.
We braid the same braid on the other side of the parting and tie its end with a ribbon. Carefully pull out the weaving pieces.
We arrange both braids in the shape of flowers and secure them with hairpins. Trim off the excess ends of the ribbons. If you wish, you can create one four-strand braid and leave it hanging loosely over your shoulder.

Three-strand braid intertwined with ribbon

Three-strand weaving goes well with thin ribbons of different colors.

Step 1. Comb your hair and divide it into three equal parts. We tie the middle part with a piece of ribbon.

Step 2. Place the first strand on the second, pass it under the ribbon and lay it on the third.

Step 3. We pass the ribbon under the central strand and again lay it between the second and third.

Step 4. We continue weaving according to this pattern. We tie the end with an elastic band.

Step 5. Carefully release the braid links, making it more openwork.

You can watch the video in more detail:

Ponytail braid

How to weave a ribbon into a braid quickly and easily? Make a ponytail - with its help the process will go much faster.

1. Comb and gather the hair at the back of the head into a tight ponytail. We insert the ribbon under the elastic band.

2. Divide the tail in half and pull the ribbon into the middle of the tail. It will serve as the third strand.

3. Place the hair between the fingers of your left hand so that each strand gets its own separate place.

Braiding is a huge branch of hairdressing. An openwork braid will be an excellent decoration for any festive look. This type of styling is very popular in wedding style. Also, braids will perfectly decorate an everyday look.

Ribbons woven into them add romance and unusualness to various braids. They can be of different colors and widths. With their help, an ordinary spikelet can turn into an elegant hairstyle. Today we will look at the benefits of ribbons in hair and how to weave them.

Hairstyle benefits

A variety of braids have become popular recently. At the beginning of the 21st century, they were considered a relic of the past. But the modern fashion industry dictates its own rules.

Braids with ribbons have many advantages:

This look is suitable for any event: be it a walk with a friend, a business meeting, a romantic dinner. A correctly selected ribbon and the right type of braid will always be relevant and appropriate;
A braid with a ribbon can be worn for several days, even a week. The ribbon makes the braid more durable. Thanks to this hairstyle, you will save time getting ready in the morning and will be able to sleep longer;
There are many ways to weave a ribbon into a braid. Even a beginner can master them;
In winter, a braid with a ribbon is a very popular hairstyle. Under a headdress, the hairstyle will retain its shape and will hardly fray;
The main advantage of this style is that you will amaze everyone with your skills and unusual weaving.

These advantages of the ribbon make braids more and more popular. Therefore, hurry up to learn the weaving technique to always be in trend.

How to choose a hair ribbon

Have you decided to try weaving a ribbon into your hair? Now the question arises: which one to choose? The main thing in this matter is the material from which the tape is made. Choose ribbons made from natural raw materials, without adding various metal frames. The wire can damage the scalp and cause discomfort during sleep.

If you choose a very bright ribbon, be sure to wash it before use. After all, it can shed and stain hair, especially light hair. Such manipulations are worth carrying out if you decide to use two ribbons in your hair, they can fade with each other.

It is worth considering the width of the product. The ideal option is 1.5 cm, it is not too thick, it is easy to braid. After all, thin ribbons are constantly twisted and rolled up.

Take into account all the previous tips, then you will find a good tape. As a result, you will get an amazing hairstyle.

Necessary accessories

Before you start weaving, prepare all the necessary materials so as not to be distracted from creating beautiful braids:

ribbon. It should be slightly longer than your own hair;
styling products: medium hold varnish, mousse, foam or gel;
combs: large with soft bristles, thin with sparse teeth and a sharp end;
rubber bands: thin and thick, take a few of each type. Can be matched to the color of your ribbon;
other materials: special hairdressing clips, you can use crabs. Several bobby pins, pins, clips.

You can buy these materials at any specialized store, the price for them is low, they will be useful to you for creating other types of hairstyles.

Important! Slightly light, damp hair is easier to braid. As a result, you will get a neater braid.

Classic 3-strand braid

How to braid with a ribbon? Weaving may not work out the first time, don’t be discouraged and keep trying. It’s especially difficult if you braid your own hair. First, try braiding your hair on a friend or a mannequin. Once you get the hang of it, it will be easy for you to style your hair with a ribbon on yourself. The simplest option is a three-strand braid, which you can master in a short period of time.

Technique:

Beautiful hairstyle - clean hair. Remember this rule, so before each new, amazing hairstyle, wash your hair and comb your strands thoroughly.
Then divide your entire hair into three equal strands. We tie a ribbon around the middle curl and tie it.
Place the first strand (counted from left to right) on the second, then pass it under the ribbon and place it on the third.
Pass the ribbon under the central curl, insert it between the second and third strands.
Continue weaving according to the same pattern. Braid all your hair and secure with an elastic band.
You can make the braid openwork by pulling out the outer strands. Do this carefully so that the final hairstyle is graceful and feminine.

At the end of weaving, secure the result by sprinkling with medium-hold varnish. With this product, styling will look natural. Do not use a permanent product, such a varnish can create a crusty effect on your hair, and this is very unsightly.

4 strand weave option

It is more difficult to make a masterpiece from such a number of strands, but the result is worth it.

Detailed instructions for weaving a braid of 4 strands with a ribbon:

Comb clean curls, divide your hair into four equal parts.
Secure the ribbon in the middle, tying it at the roots or using a hairpin, and immediately cover it a little with hair.
We count the strands from left to right. We start with the left side of the head of hair. Throw the outermost strand over the adjacent one and pass it under the ribbon.
Take the rightmost strand, throw it over the third strand, and run it under the first.
Repeat the steps again.
When braiding your hair correctly, you will notice that the ribbon either hides or comes out. Braid the rest of your hair in the same manner.
Secure the finished braid with an elastic band and tie it with a ribbon on top.
Finally, spray your hair with hairspray.

With this hairstyle you will shine at any event. Not a single man will pass by.

5 strand braid

Weaving a braid with two ribbons is not an easy task. It requires a good level of preparation, a little effort and patience. But with the following instructions, your braid will come out stunning. With this hairstyle you will be noticed at the most sophisticated party.

Technique:

First, comb your hair, you can sprinkle the curls with water from a spray bottle, so the hairs will become pliable and easier to work with.
Separate a small section of hair from the top of your head. Tie a ribbon under this part of the curls. Tie a long ribbon so that the knot divides it in half, that is, you get two ribbons.
Divide the separated hair at the crown into three equal parts. Distribute the hairs and ribbons in this order: two strands, a pair of ribbons, and the outermost strand. The countdown is from left to right. The ribbons replace the other two strands of curls.
Start weaving on the left side, intertwine the leftmost strand with the second, pass the first under the second, then onto the first ribbon and pull under the second ribbon. The left hand should hold one curl and a couple of ribbons.
We begin to take the hair from the right side: we place the outermost strand under the nearby one, put it on one ribbon and thread it under the second. The ribbons cannot be swapped; they remain in their places.
Repeat the previous steps on the rest of your hair. Just grab curls from the total head of hair to make a braid from the entire head of hair. To begin, separate a strand to the left of your temple, attach it to the leftmost strand, and begin weaving. Pass the connected curls under the second strand and throw them over the first ribbon, thread them under the second. A strand and both ribbons should remain in your left hand.
Do the same manipulations on the other side, pick up a strand to the right of the temple, connect it to the outermost curl. Thread through the ribbons, do not swap them.
Alternate the previous steps, you will notice that you get an inverted braid of three strands, but with a ribbon in the middle.
When finished braiding, tie the end with an elastic band or ribbon.
You can add volume and delicacy to your hair by slightly stretching out the outer curls.
Finally, spray your hair with hairspray.

There are many variations with this braid. Today you can braid one braid in the middle, tomorrow - a braid at an angle, another day - two braids. Any hairstyle will look chic and attract the attention of others. You will be noticed in any company and considered a jack of all trades. Don’t be afraid to experiment, then your image will always be extraordinary and unusual.

French hairstyle with ribbon

This type of hairstyle originates from French braids. The styling looks stylish and very feminine. There is no shame in showing this masterpiece with curled hair even at a special event.

Step by step:

Comb your hair and part it in half. Separate a small part of the curls at the parting, divide it into three equal parts.
Attach the selected ribbon to the middle curl. Hide the small tip of the ribbon while weaving so that it does not peek out.
Start braiding a regular braid, strand on the left and always place the ribbon underneath. The strand on the right with the ribbon should always lie on top. The main principle of weaving is wrapping the middle strand with ribbon.
With each curl, leave the strand at the bottom loose. Instead, take a new curl, connect it to the ribbon and weave further.
Thus, weave it to the other side of the head, it will look like a kind of waterfall.
When the braid reaches the ear level of the opposite side, finish braiding with a regular braid and secure it with an elastic band. The hanging braid can be curled into a flower shape and decorated with shiny pins.
At the end of braiding, sprinkle the curls with hairspray. It is advisable to slightly tighten the horses. With curls, this hairstyle looks most advantageous.

If during the first braiding your braid turns out to be loose, then you can periodically secure it with bobby pins. This way the hairstyle will last a long time and will not fall apart;
While weaving, constantly pinch the strands with your fingertips so that the weaving is uniform and beautiful.

A waterfall with a braid is a universal weave, it is perfect for every day, any holiday. You just have to choose the right tape. It is better to choose a color that contrasts with your natural hair. This way the ribbon will be clearly visible, it will give the image something unusual.

In general, braiding with ribbons enlivens the image and makes an ordinary braid unusual. This simple and cheap accessory is used by professional stylists to create fashionable, unique looks. Why don’t you try this great way to decorate your hair?

Braiding with ribbon: video

Below is a video in which you can clearly see a diagram of weaving a braid with a ribbon:

Braids are a versatile and popular hairstyle. It looks very harmonious on long hair. It always looks advantageous, hiding hair imperfections. Creates additional volume and maintains neatness throughout the day.

Ribbons in weaving are used in various colors and structures: satin, silk, lace, with beads and rhinestones, with kanzashi flowers, etc. Wide and thin. However, your own part of the hair, braided in a thin braid and decorated with small hairpins with stones, can act as decoration.

Easy option. Step-by-step instruction

It’s better to start with something simple in order to understand the meaning of the technique, and in the future create masterpieces of tape art. The principle of a single-strand braid:

Comb your hair thoroughly, dampen it slightly, and use a styling product. If your hair is thin and unruly, apply wax to add weight.
Select one large area on the top of your head.
Tie a fabric strip underneath it.
Form the selected area into a loop facing left. For convenience, secure with a hairpin.
Place the ribbon piece on the loop and wrap it tightly. Take your time, the curl should not fall apart.
Pick up a loose curl and form a loop again.
Throw on a strip and wrap it around.

Once you complete these steps, continue until the end. For a more openwork effect, the loops should be pulled close to each other. The scheme is simple to implement, but looks very beautiful and neat. It can be a worthy addition to an office or evening look.

Three-strand weave

A regular three-strand braid is very easy to weave. A beautiful stripe will serve as an additional decorative element that will add fresh notes to the image.

In the back of the head area, separate three equal parts. Attach a ribbon to the right one. Braid, alternately throwing strand over strand. Make sure that the strip is always on top and does not twist. This is a simple and fast way.

French spikelets have always been popular. Their technique allows you to completely collect your hair into a charming hairstyle. The point is to pick up the side curls into the base. In this case, the ribbon decor can be the main strand.

"Snake"

This design in the form of a snake is interesting, as it is performed in a zigzag manner. And if you implement your plan using the reverse French ear technique and add decoration, you can achieve an amazing result.

Comb and apply styling product along the entire length. This will help add weight to your curls and make them more manageable.
Separate a medium-width strip along the forehead line from the left-sided temporal area. This should not be a thin strip, the width of which will allow you to weave a spikelet.
In this area at the temple, separate a small thread and divide it into two equal ones. Tie a ribbon to the end. This way you will get three working ponytails.
Doing it inside out means that the working threads are placed under the bottom. Those. Bring the right strand under the middle one. She becomes central. Then the left one goes under the central one. This is the initial stage of braid formation.
Next, carry out all the actions alternately, braiding free side curls to the working curls.
Before reaching the line of the opposite temple, it is necessary to rotate the creation. Now the process will be carried out from right to left. Part of the untouched hair at the temple will help to carefully perform the turn.
Turn the spikelet, weaving the temple strands into it, but do not use them on the left side.
After completing a couple of turns, stop braiding the strands on the right and use those that hang from above.
Continue without reaching the opposite side of the head. You need to leave a few hairs there to make a turn in the other direction.
Stop braiding on the right side, and only braid the opposite curls.
So you turned down. Now to the right - braid only the right free strands.
The third turn is carried out by analogy with the previous ones. The number of turns depends on the length of the hair.
Secure the edge of the braid with an elastic band and make a charming ponytail by tying it with a bow.

To make the styling look more voluminous, during execution it is necessary to periodically pull out the loops. Do this carefully so that the entire structure does not fall apart. The stretching should be symmetrical.

This style is suitable for both everyday life and going out. Use the color of the ribbon to match the color of the dress or additional accessories included in the look.

Hollywood wave weaving with ribbon

This charming hairstyle will make you feel like a real star. It is woven according to the principle of a single-strand braid (discussed above). But a larger number of rings are created, due to which the styling takes on an amazing look.

Fasten the braid to the top of your head.
Separate a wide strand to the left of it.
Place the ribbon around the strand and form a window (loop).
Pull it through the window and tighten it.
Take the next strand on the left side, also make a loop, pull through and tighten.
The number of hairs taken varies. Five waves look the most attractive and complemented.
The result is a stepped pattern made from braid. Next, you need to create the same pattern in a different direction. The tails of the working strands are involved in this. You should start with the one closest to the tape. It is worth noting that these tails will be working until the end of the binding.
Add to it a pick-up from the total mass of hair. Make a loop, pull the braid through and tighten. A small link is formed. It should be pulled out a little.
Take the next ponytail, add a catch, create a window, pull it through and tighten it.
Such actions are performed until the last tail.
The next stage is the return of the working tails to the right side, i.e. repeat the steps taken at the beginning.
You should get an interesting pattern: ribbon steps and arcs of loop links into which the ends of the decoration are pulled.
The links are stretched as you weave to the size you need. You can cover your head with them so that the hooks are not visible. Or leave a tighter weave.
Carry out the process step by step along the entire length of the hair.
You can braid to the ends and secure them with a bow.

An unusual variation would be weaving completed at the back of the head. Gather your ponytail and create a classic four-strand braid, pulling out the edge curls. Next, twist the braid in a spiral, drawing a flower. Secure with pins.

A braid with an woven braid is an opportunity to highlight your individuality. Create a unique image. Give free rein to your imagination, because there is somewhere to roam. There are a lot of ways to create hairstyles with braids and ribbon elements. Each can be improved and adjusted to suit you.

There is a way to weave braid into a finished hairstyle. To do this you need to use a crochet hook. Fasten the ribbon and carefully pull it through the loops, creating the pattern you want.

For young fashionistas

Little princesses also have the right to look amazing. Surely every mother braided her daughter’s hair. And it was limited to three-stranded or a regular spikelet. Knowing the basic techniques for weaving braids with ribbons, you can decorate the head of a little fashionista and not worry about the design falling apart the first time she jumps off the stairs.

In this case, it is important that the styling does not interfere, does not make it heavy, and that the hairs do not get into the eyes. The most convenient option is a bun. But an ordinary bun looks ordinary. You can create a beautiful bun.

Tie a high ponytail. Create a four-strand braid with a braid. Wrap it around the base of the tail. Decorate with flowers.
By the way, stripes with kanzashi flowers will look very beautiful on children's heads.

Kanzashi flowers on a braid will look original even on the head of a tiny girl. Braid a zigzag braid with such an element, picking up all the curls. Multi-colored flowers scattered cutely throughout the binding will create a mischievous look.

A braid with a ribbon is a classic combination that has never lost its relevance. The implementation scheme is simple, as it might seem at first glance. With persistence, desire and patience, every girl can master the technique. The result is a non-trivial and chic hairstyle.

Girls with beautiful long hair have always attracted the admiring glances of men. But it’s hard to walk around with your hair down all the time, so the fair half of humanity comes up with various hairstyles that decorate them even better. For example, today various versions of braided braids have become very popular, especially using ribbons. to make it look neat and unusual?

Braid using ribbon: what is the secret of popularity?

Despite the fact that girls and women have long known the technique of weaving various braids, this hairstyle remains quite relevant even in the modern world. It has gained particular popularity recently. This can be explained by the fact that braiding (with or without a ribbon) allows you to create a romantic and light look. This hairstyle is considered universal, because it can be done for every day and for a party. Brides love to weave ribbon into their braids, and even office workers can add such a cute accessory to their usual hairstyle. If you think that a braid with a ribbon always looks monotonous, then you are very mistaken, because today there are many options for this hairstyle.

What do you need to start braiding with ribbon?

What you will definitely need if you want to learn how to weave a ribbon into a braid is a comfortable comb that will not tangle your strands, small elastic bands, multi-colored ribbons and bobby pins. That's the whole set. I am sure that every girl will have these things in her arsenal. If not, then you can easily purchase them at any store. Today, there are so many different options and techniques for weaving braids with ribbons (photos of which can be seen below) that you can easily get lost. Therefore, before you begin the weaving process, decide for yourself which option you like best.

Braid with two ends of ribbon

First of all, you need to make a regular ponytail, securing it with an elastic band, which is covered with a tied ribbon on top. This way you will immediately make the elastic band invisible and create a convenient location for the ribbon. Remember that both ends must be the same length. Next, you need to divide the tail into three equal parts, while the left and right should capture the two ends of your ribbon. You can braid the braid as you usually do. Having secured the braid at the end with an elastic band, you can hide it again with a playful ribbon bow. This hairstyle looks really cute and romantic.

Three strands of braid using one ribbon

If you don't know how to weave a ribbon into a braid to make it look interesting and unusual, then try to remember how to weave a four-strand braid. In this case, the fourth strand here will be the ribbon. At first you may think that this hairstyle is very difficult, but with practice it will become easier. A braid with a ribbon instead of a fourth strand will help you create a real work of art from an ordinary hairstyle.

French braid with ribbon

The main feature of the French braid is the fact that the strands need to be woven close to the skin so that at the end some geometric pattern can be seen between them. To learn how to do such a rather complex hairstyle, you need to know how to weave a French braid with a ribbon (the diagram is shown a little below). As practice shows, complex hairstyles turn out better if you can simply follow the description. Or just ask your girlfriend to help you.

First, choose a spot on the back of your head where your braid will start. Select a fairly large strand here. To make it easier for you, you can secure it with an elastic band, but do not forget to remove it later. Divide this strand into three parts and braid it like a regular braid, but slightly loosening the strands. Also connect parts from the first large strand with small curls on the right side. Then you do the same thing, but grab the curl on the left side and so on. Before you get a French braid with a ribbon, try to learn how to do it without this accessory. Then, when you're ready, add a ribbon underneath the side strands on both sides. At the same time, remember that the ribbon must necessarily move from one side to the other during the weaving process. You can create a bow at the end of the braid.

"Fish tail" with ribbon

If you don't want to stress too much, but decide to create a beautiful braid with a ribbon, then turn your attention to the fishtail hairstyle. First, divide your hair into several fairly thin curls and cross them according to a predetermined pattern (it depends on how many strands you have chosen). The ribbon can be woven in immediately during the process of creating a braid, and its free end can simply be released. You can also choose several multi-colored ribbons, then the hairstyle will look more playful.

Weave a ribbon into a braid without an elastic band

If you don't want to use an additional elastic band, but want to understand how to weave the ribbon into a braid, then you just need to learn how to apply it to the base of the future braid so that it does not slide off later. If this is difficult for you to do, then you can try tying the ribbon in a knot, and only then little by little weave it into the braid. Also, such accessories can be secured using ordinary invisible ones. In this case, you will need to pull the strands in the direction opposite to the future weaving. A tricky and interesting way is to weave the ribbon in after the braid has been braided. To make it easier for you, use a needle with a fairly wide eye or a crochet hook.

What ribbons are best to choose for a braid?

Of course, if you want to understand how to weave a ribbon into a braid, but don’t know which accessory is best to choose, then just follow the instructions. But if they do not concern such a moment, then you can use absolutely any suitable tapes. They can be silk or satin (the latter are most often chosen for such hairstyles). To settle on color, think through your image to the smallest detail. It is best if the shade of the ribbon matches your clothes.

Undeservedly forgotten earlier, hairstyles with braids have again taken a worthy position among the most fashionable hairstyles in recent years. In modern design, they have become more textured, acquired intricate shapes and openwork lightness. Weaving braids allows the use of various accessories that make them even more elegant and solemn. Hair styling with a ribbon is used most often in festive hairstyles. However, having learned how to do such hairstyles, you can arrange a celebration for your curls at least every day, and our master classes with step-by-step instructions will help you with this.

QUICK NAVIGATION THROUGH THE ARTICLE

Single strand braid

If you think that in order to braid a beautiful braid with ribbons you must use complex multi-strand weaving patterns, then this is not true at all. An accessory such as a ribbon allows you to create an interesting hairstyle even using just one strand and one ribbon.

Please note that the role of a ribbon can also be played by a beautiful braid, elegant lace, a very thin scarf, a long chain, a decorative cord, etc.

Take a close look at the photo of such a braid, and it will become clear to you that it looks very interesting and unusual.

You should braid your hair using the following steps:

Separate a wide section of hair from the crown of your head.
Secure the ribbon underneath it using bobby pins or tie it with a knot to a thin strand under the main wide strand that will be used for braiding.
Wrap the fabric around the main strand, forming a loop.
Pull the strand in one direction, forming a beautiful loop.
Add a piece of loose hair to the main strand, picked up from one side.
Wrap a ribbon around the strand and tighten the loop.
Pull the strand in the opposite direction.
Again, grab additional loose curls, but from the other side.
Wrap the fabric around the strand of hair in the same way as in the previous case, and pull out the loop.
Repeat these steps, alternately pulling the strand in one direction or the other, and adding loose strands to the braid until they are all tucked into the braid.

Schematically, this process looks like this.

As a result, you will get an elegant hairstyle with a ribbon and Hollywood curls.

You can see the process of creating such a braid by a master in the video.

Two-strand braid

If you have mastered the lesson of weaving with one strand, you can begin to study the pattern from two curls and ribbons.

To make it clearer how to weave it, consider the step-by-step diagram using colored laces as an example. Orange laces A1 and A2 act as strips of fabric, and white laces B1 and B2 can be considered as curls.

First, we cross the strips of fabric with each other, and then we place strands of hair, one on top, the other on the bottom.

Once in the middle, the strands intersect each other, and the ribbons follow one below, and the other from above. The actions are repeated in this order until the end of the braid.

The result is such a beautiful braid, intertwined with ribbon.

It may be easier for you to weave if you watch how the girl in the video does this hairstyle.